Bulgarcom
 
БългарскиDeutsch
   
    Home E-mail Print  
Кофраж за колони


Column formwork
Кофраж за колони Alispilar
Column formwork systems with incorporated into the panels couplings (bolt and wedge) for quick assembly and implementation of standard column sizes with high quality of the concrete surface.
Кофраж за колони Springform
High performance formwork system for cylindrical pillars. Springform pillars is the ideal product for implementing large amounts of pillars with the same mould and therefore, it is cost-effective on site. It provides a smooth surface finish and a single vertical joint.
Кофраж за колони Paschal
Steel formwork for round and oval columns
The formwork offers absolute tight due to the special design of the vertical joint with overlap of the plywood, high use rates, no cost for refuse collection and no reduction of concrete speed for small diameters columns.
 
Alispilar column formwork
Alispilar column formwork Frame formwork system Alipilar for column implementation

Panel heights: 300, 140 и 80 см
Panels widths: 68, 50 и 10 см

Column formwork systems with incorporated into the panels couplings (bolt and wedge) for quick assembly and implementation of standard column sizes with high quality of the concrete surface.
Alispilar column formwork Alispilar consists of light-weight steel panels for manual assembly without the need of a crane while maintains permissible concrete pressure of 80 kN/m2.

The couplings are incorporated into the panel itself so there is no need for additional parts, preventing the loss of small tools, facilitating handling and later use.
Alispilar column formwork An easy, fast joining system. A single hammer stroke sets the wedge and bolt, leaving set of panels perfectly joined together.
Alispilar column formwork The formwork system is truly light-weight and strong. About 50% lower weight than that of the other systems and at the same time permissible concrete pressure of 80 kN/m2. This allows manual assembly without the need of a crane.

Combinations with panels Alispilar

Кофраж AlispilarPanel 68 cm Combination: 4 х 68 cm panels
Min size: 25 см х 25 cm
Max size: 60 см х 60 cm 
Кофраж AlispilarPanel 50 cmCombination: 4 х 50 cm panels
Min size: 20 см х 20 cm
Max size: 40 см х 40 cm
Кофраж AlispilarPanels 50 and 68 cmCombination: 2 х 50 cm panels
2 х 68 cm panels
Min size: 20 см х 25 cm
Max size: 40 см х 60 cm
Кофраж AlispilarPanels 68 cm + extension of 10 cmCombination: 4 х 68 cm panels + 10 cm extension
Size: 70 cm х 70 cm
Кофраж AlispilarPanels 50 cm
Combination: 6 х 50 cm panels
Min size: 20 см х 70 cm
Max size: 40 см х 90 cm
Кофраж AlispilarPanels 50 and 68 cmCombination: 2 х 50 cm panels
4 х 68 cm panels
Min size: 25 cm х 75 cm
Max size: 60 cm х 110 cm
All combinations allow intervals of 5 cm.

 
Springform column formwork
Кофраж Springform High performance formwork system for cylindrical pillars. The formwork consists of a made-to-measure fibreglass mould and has a single vertical steel joint that incorporates the pillar closing system. The closing system is made by the use of handset wedges and bolts; a single hammer tap closes the pillar.

Кофраж Springform

Springform pillars is the ideal product for implementing large amounts of pillars with the same mould and therefore, it is cost-effective on site. It provides a smooth surface finish and a single vertical joint. The system is flexible, quick, light and allows more than 100 applications. Maximum assembly and releasing easiness.
 
Paschal column formwork
Paschal column formwork Steel formwork for round and oval columns
The formwork offers absolute tight due to the special design of the vertical joint with overlap of the plywood, high use rates, no cost for refuse collection and no reduction of concrete speed for small diameters columns.

Paschal column formwork

Column sizes:
Diameter: 100/90/80/70/60/50/45/40/35/30/25 cm
Heights: 300/275/150/125/75 cm